LIFTMASTER REMOTE 892LT

The LiftMaster 892LT is a compatible remote control with LiftMaster, Chamberlain, Sears Craftsman, and other garage door openers. Here are the instructions for programming and using the LiftMaster remote 892LT:

Programming the 892LT to your garage door opener:

1. Locate the “Learn” or “Program” button on your garage door opener motor unit. It is usually located on the back or side of the team.

2. Press and release the “Learn” or “Program” button. The indicator light on the motor unit should turn on, indicating it is ready to receive programming.

3. On the 892LT remote control, locate the cover and remove it by sliding it in the direction indicated by the arrow.

4. You will see a row of 8 or 9 switches (DIP switches) inside the remote control. Set the switches to match the same pattern as your existing remote or as directed by your garage door opener’s manual.

5. Press and hold the button you wish to program (e.g., “Button 1”) on the 892LT remote control.

6. While holding the button, press and release the “Learn” or “Program” button on the motor unit. The indicator light on the motor unit should flash or blink to indicate that the programming mode has been activated.

7. Release the button on the 892LT remote control.

8. Test the remote control by pressing the programmed button. The garage door opener should activate, either opening or closing the door.

Erasing the 892LT from your garage door opener:

If you need to erase the 892LT from your garage door opener’s memory, follow these steps:

1. Locate the “Learn” or “Program” button on your garage door opener motor unit.

2. Press and hold the “Learn” or “Program” button until the indicator light on the motor unit turns off (typically about 6 seconds).

3. Release the button. The remote control has been erased from the opener’s memory.

Reprogramming the 892LT to a different garage door opener:

If you want to program the 892LT to another garage door opener, follow the programming instructions provided earlier with the new garage door opener’s “Learn” or “Program” button.

These instructions should help you program, erase, and reprogram the LiftMaster remote 892LT control. It’s important to note that the exact steps may vary depending on your specific garage door opener model, so always refer to your opener’s manual for detailed instructions if needed.

The LiftMaster 892LT is a remote control designed for operating LiftMaster garage door openers and certain gate operators. It offers convenient wireless control over your garage door or gate. Here’s some information about the LiftMaster 892LT remote:

Features and Functions:

1. Compatibility: LiftMaster remote 892LT is compatible with LiftMaster Security+ 2.0 garage door openers, gate operators, and specific models of Chamberlain and Craftsman garage door openers manufactured after 2011.

2. Button Layout: The remote typically has three buttons, allowing you to control up to three separate garage door or gate opener units.

3. Security+ 2.0 Technology: The 892LT remote utilizes LiftMaster’s Security+ 2.0 rolling code technology, which helps prevent unauthorized access to your garage or gate. This technology generates a new code each time the remote is used, making it more secure against code grabbing or replay attacks.

4. Programming: To program the LiftMaster remote 892LT to your garage door opener or gate operator, you’ll need to follow the specific programming instructions provided by LiftMaster. The programming process typically involves accessing the “Learn” or “Program” button on your opener or operator and then pressing the corresponding button on the remote to establish the connection.

5. Battery Replacement: The LiftMaster remote 892LT is powered by a 3V coin-cell lithium battery (CR2032). When the battery becomes low, the LED indicator on the remote may flash to indicate that it needs to be replaced. Open the remote by sliding the cover down or pushing the release button, and then replace the battery with a new one.

6. Range and Operation: The 892LT remote has a typical range of up to 500 feet (150 meters) in an open space. The content may vary depending on environmental factors, such as interference from other devices or structures. To operate your garage door or gate, press the corresponding button on the remote.

It’s important to note that while these instructions provide a general overview of the LiftMaster 892LT remote, specific programming and usage instructions may vary depending on your particular model and the garage door opener or gate operator you are using. Consult your LiftMaster 892LT remote’s manual or visit the LiftMaster website for detailed instructions specific to your device.